You can use the NOTES.INI setting LOGSTATUSBAR=1 to enable logging of status bar messages to the local log file, LOG.NSF. To view the logged messages, open the file, LOG.NSF, and then click the Miscellaneous Events view. Status bar messages are appended with “Status Msg.”
To write the status bar messages to an external file, use the NOTES.INI setting Debug_Outfile=<path to file> with the NOTES.INI setting LOGSTATUSBAR=1. For example:
LOGSTATUSBAR=1
Debug_Outfile=c:\temp\StatusBarLogging.txt
The Liberty profile has support for java 8 for some time. If you want java 8 on WebSphere 8.5.5 full profile you must apply the fix pack 9 first.
Installing the optional Java 7.0 or Java 7.1 or 8 does not imply that profiles can take advantage of this new version of Java. The managesdk command has to be used to switch Java or the WAS Admin Console. wsadmin can also be used.
Instructions on how to use the managesdk can be read on this IBM TN
See the SDK version for each WAS version on this link
I try several times to setup Forms Expericence Builder (8.5 and 8.6) on top of Portal Cluster (2 nodes) using the Installation Manager (IIM)
I got the following error during the ear deployment.
WASX7015E: Exception running command: “source “/opt/ibm/WebSphere/wp_profile/ConfigEngine/config/work/was/curJaclScript.jacl””; exception information:
com.ibm.bsf.BSFException: error while eval’ing Jacl expression:
java.lang.IllegalArgumentException: WASX7122E: Expected “-” not found.
-appname “”Forms Experience Builder”” -cluster PortalCluster -MapResRefToEJB { {“IBM Forms Experience Builder WAR 8.5.1.489” “” builder.war,WEB-INF/web.xml jdbc/BuilderDataSource “javax.sql.DataSource” “jdbc/IBM_FORMS_DATA_SOURCE” “” “”} {“IBM Forms Experience Builder WAR 8.5.1.489” “” builder.war,WEB-INF/web.xml mail/BuilderMailSession “javax.mail.Session” “mail/IBM_FORMS_MAIL_SESSION”}} -MapModulesToServers { {.* .* WebSphere:cell=dmgrCell01,cluster=PortalCluster}} -MapRolesToUsers { {“UseApplicationsUsers” No Yes {} {}} {“AdministrativeUsers” No No {adminportal} {}} {“EditApplicationsUsers” No Yes {} {}}} -usedefaultbindings -CtxRootForWebMod { {“IBM Forms Experience Builder WAR 8.5.1.489” builder.war,WEB-INF/web.xml /forms} {“IBM Forms Experience Builder Basic Auth WAR 8.5.1.489” builder-basic.war,WEB-INF/web.xml /forms-basic}}
I search a lot about the problem without success. I raise a PMR and the answer was:
“You cannot install FEB into a Portal server at this time, there are a few known issues with the IIM installer. If you want to install FEB into the same WAS as portal then you will need to deploy the .ear manually, the steps can be found in the Knowledge Center -> http://www.ibm.com/support/knowledgecenter/SS6KJL_8.6.0/FEB/in_deploying_was.dita”
Doing the manual steps i got FEB working with WebSphere Portal
This can be done using an agent that is run by an ID that has access and delete rights to all the mail files on the server. The email will have the same Universal ID(UNID) in all of the mail files. This will allow you to get a handle on that particular email. The example code below gets a handle to the People view of the server’s name and address book. From the person document, it obtains the mail file for the user and then opens the mail file, locates the email and removes it.
The first step is to locate the UNID. This can be found by bringing up the document properties for the email you want to remove and looking at the beanie tab:
The UNID will be the 32 characters on the first 2 lines without the OF from the first line and the ON from the second line. Also, do not include the colon : on the 2 lines. So, the UNID for the above screen shot would be – EF883FE6FC7A14D185257F8E005D7D7D
The following code is an example that can be used to accomplish this. Please note that this code is provided as an example only. IBM support will not be able to modify or customize this agent. A version of this agent will need to be run on all mail servers in your environment. It can be set to run as a scheduled agent or via action menu selection. The target in both the scheduled version and action menu selection should be set to None
Sub Initialize
Dim s As New NotesSession
Dim perdoc As NotesDocument
Dim pview As NotesView
Dim mailDB As NotesDatabase
Dim db As NotesDatabase
Dim strServerName As String
Dim doc As NotesDocument
On Error Resume next
‘Set the strServerName variable to point to your server name
strServerName = “YourServer/YourDomain”
Set db = s.Getdatabase(strServerName, “Names.nsf”, False)
Set pview = db.GetView(“($People)”)
Set perdoc = pview.GetFirstdocument
While Not perdoc Is Nothing
Set maildb = s.Getdatabase(strServerName, perdoc.Getitemvalue(“mailFIle”)(0), False)
If Not maildb Is Nothing Then
Set doc = maildb.Getdocumentbyunid(“<Target document UNID goes here>”)
If Not doc Is Nothing Then
Call doc.Removepermanently(True)
End If
End If
Set perdoc = pview.Getnextdocument(perdoc)
Wend
End Sub
I found the information above on http://www-01.ibm.com/support/docview.wss?uid=swg21980866
This week i am working with TDI to sync MS AD and Domino. There are several ways to sync this two ldap servers.
Searching on the web on how can i generate hundreds user accounts on the MS AD test server, i found LDIF Generator.
This little java code generate a LDIF file and you can import using, for example, the Apache Directory Studio.
The badge is using Mozilla OpenBadges technology to let people display verifiable acheivements.
This open mic presentation has 40 tips on the mail routing subject.
This behavior is related to an intentional change in Java6SR16FP20 to tighten security by disabling the MD5 algorithm by default in latest JVM release. The Domino Server Controller, however, currently requires MD5. IBM is investigating a solution to leverage a more secure cipher for the Domino Server Controller (a.k.a. Domino Java Console). This issue is tracked as SPR# RSSNA6UU79.
Read the complete IBM Technote here
I found this article today.
It covers the fundamentals of Domino Replication and options for troubleshooting common issues.
1. Introduction
2. Elements of Replication
3. Creating and Deleting Replicas
4. Running Replication
5. Replication Configurations
6. Other Areas of Replication
7. Logging and Debug options.
8. Troubleshooting
After download all files i just want to rename the files to presentation titles. I search for a rename software but the problem was not about software. The problem was how to get the relationship with the file and the presentation name.
I open every pdf file and get the presentation title and create the relationship. After that a small java program rename all files on a folder.
The file bellow has the relationship
The java code bellow rename the files on the folder. Just put the reanamer.txt and Rename.jar on the same folder of the dowloaded files and run java -jar Rename.jar
import java.io.BufferedReader;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileReader;
import java.io.IOException;
public class Rename {
public static void main(String[] args) throws FileNotFoundException {
BufferedReader br = null;
String line = "";
String cvsSplitBy = ",";
String csvFile = "renamer.txt";
br = new BufferedReader(new FileReader(csvFile));
try {
while ((line = br.readLine()) != null) {
String[] oldName = line.split(cvsSplitBy);
System.out.println(oldName[0]);
System.out.println(oldName[1]);
File oldfile = new File (oldName[0]+".pdf");
File newfile = new File (oldName[1]+".pdf");
if (oldfile.renameTo(newfile)) {
System.out.println("Rename sucessfull");
}
}
} catch (IOException e) {
e.printStackTrace();
}
try {
br.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
}